|
Product Details:
Payment & Shipping Terms:
|
| Material: | Rubber | Diameter: | 100-580mm |
|---|---|---|---|
| Max Diamater: | 160-680mm | Flange Outer Diameter: | 120-640mm |
| High Light: | papermaking Rubber Air Spring,rubber papermaking air spring |
||
Industrial Rubber Air Spring Air Tire
1,Industrial Rubber Air Spring Air Tire mainly introduction
Air springs are commonly known as pneumatic tires, corrugated pneumatic tires, airbags, etc. It is a precision-designed rubber fiber corrugated
tube. It does not provide force or support load by itself, but uses compressed air to fill the inside of the air compressor to achieve the force.
Transfer and elastic effect. According to the requirements of the stroke, the air spring is generally designed to be 1-3, and it can also be designed
and manufactured to be 4 or more than 5 when needed. Under certain conditions, the air spring can also be superimposed.
2,Industrial Rubber Air Spring Air Tire data sheet
| Diameter | 100-580mm |
| Max diamater | 160-680mm |
| Flange outer diameter | 120-640mm |
| Number of flexur | 1-3 |
3,Industrial Rubber Air Spring Air Tire Usage
It is mainly used in the papermaking machinery industry. It is used for stroke adjustment and tension control of calibrators, calenders, presses, scrapers, screens and other parts. In addition, it is also used in construction, chemical, and machinery industries. Seismic, seismic isolation and stroke control
4 ,Industrial Rubber Air Spring Air Tire Feature:
Air springs have non-linear characteristics, and their stiffness changes with load, so their natural vibration frequency is almost unchanged under any load, so that the spring device has almost constant characteristics, and it has a good ability to absorb high frequency vibration and sound insulation. It can bear axial load and radial load at the same time. Through internal pressure adjustment, it can also get different bearing capacity. Therefore, it can be applied to various load requirements.
During the effective stroke of the air spring, the stiffness, height, cavity volume, and bearing capacity of the air spring are adjusted by increasing or decreasing the inflation pressure. At the same time, its stiffness, height, cavity internal volume, and bearing capacity will change smoothly and periodically with the increase and decrease of the load, thereby achieving flexible transmission of bearing capacity, effective adjustment of stroke, and vibration amplitude and vibration load Efficient control. An air chamber can also be added for automatic adjustment.
5,1,Industrial Rubber Air Spring Air Tire yInstructions for use
It has a low installation height and is very compact.
Although it has a large load and a large stroke, it is possible to design a compact actuator with a low installation height.
Refueling, no maintenance required
Because there is no rotating part, a reactor that does not require refueling and maintenance can be obtained.
Contact Person: Maple
Tel: +86 15103371897
Fax: 86--311-80690567
