|
Product Details:
Payment & Shipping Terms:
|
| Model No: | HDPE Doctor Blade | Application: | Paper Roller ,Dryer Cylinder Section |
|---|---|---|---|
| Machine Speed: | Below 1200m/min | Name: | Tissue Paper Machine Plastic Doctor Blades |
| High Light: | Tissue Paper Machine Plastic Doctor Blades,Tissue Paper Plastic Doctor Blades,ISO9001 Plastic Doctor Blades |
||
Our company specializes in making paper machine doctor blade, cutting round blade, printing Ink blade , all kinds of blade holder etc.We have many years of experience in manufacturing blades, according to the different needs of customers to process a variety of high-quality blades to meet the needs of different customers.
All our blades are ranged according to their functionality. Economy range blades are designed to meet today's quality demands at competitive prices. Doctor blades in the Durability range are designed for maximum blade lifetime. The Performance range includes blades with specific superior features like low friction, high heat resistance or effective cleaning properties.
Carbon Doctor Blade Major uses: Suitable for ceramic rolls, dryer rolls, ebonite rolls.
Key Features: Carton fiber 40%.Epo-glass fiber, with better lubricity and anti-abrasion.Temperature resistance:185 centigrade.
Epoxy Fiber Doctor Blade Major uses: Suitable for all rolls from mesh fabric to automatic paper-reel.
Key Features: Microfiber and epoxy fiber, with very good chemical resistance.
Temperature resistance: 185 centigrade.
Phosphor Bronze Doctor Blade Major use: Suitable for drying rolls,Yankee rolls in a dryer, cold steel rolls, WC thermal spraying rolls.
Key Features: Softest in all metal blades, better removing dirt, less damaging rolls.
Stainless Steel Doctor Blade Major use: Suitable for stone rolls and Ebonite rolls in press section.
Key Features: High hardness, with better scraping result, better corrosion-resistance.
HDPE Doctor Blade Major uses: Suitable for rubber rolls in wet end and polyester rubber rolls.
Key Features: promoting lubricity blade and suitable forthe wet end.
Temperature resistance: over 80 centigrade.
Molecular weight: 6million.
Packaging:
products will packaged according to their shapes, weight, transport distance and transport modes. large machines will be packaged in sections. every part of export machinery will be in standard export package-seaworthy wooden case, waterproof film, straw rope, carton box etc., which will ensure the intactness of products.
Transportation:
products will be transported according to their features and clients's needs. air, train and sea transportation are all available.
| Problem | Reason | Measure |
| Uneven wear, frequent blade replacement | 1. The surface of roller or dryer is uneven 2. The doctor holder is damaged or dirty 3. Sediment |
1. Use a softer blade 2. Clean, repair or replace the doctor holder 3. Use abrasive blade |
| Excessive wear on middle or edge of blade | 1. The blade is not installed on the top of the roller 2. The old blade sinks (or leaves) the roller or dryer |
1. Refit or add gasket at the back of blade if necessary 2. Replace the old and sunken blade |
| Excessive wear at one end of blade | The displacement of blade is not parallel to the axial direction of roller or dryer | Add gasket, if necessary, move bearing and bracket to adjust scraper parallel to axial direction |
| The blade is worn evenly, but the end face is rough | 1. There is deposit on the surface of roller or dryer 2. The pressure of blade is too high 3. The material of blade is too hard |
1. Use abrasive blade when necessary 2. Reduce the pressure 3. Use a slightly soft blade |
| Excessive wear in sheet area | The sheet leaves sediment on the roller or dryer | 1. Use abrasive blade when necessary 2. Trim the edge of blade frequently 3. Use blade with slotted end to prevent excessive pressure on both ends of roller or dryer |
| Excessive wear out of sheet area | The sheet lubricates the roller or dryer | Use blade with slotted end |
| Local depression | The blade is damaged, electrostatic (discharge/ electrolysis /heating) | Insulate the blade from the holder or use a non-metallic blade |
| The blade produces burr | 1.The material of the blade is too soft 2. The pressure is too high 3. The angle of the blade is too small |
1. Use a slightly hard scraper 2. Reduce the pressure 3. Adjust the bearing or bracket to increase the angle, and use the instrument to check and correct the angle |
Contact Person: Maple
Tel: +86 15103371897
Fax: 86--311-80690567
