The problem of corrugated cardboard line bursting has seriously plagued many cardboard production and carton processing manufacturers in the world; especially in dry autumn and winter or in low humidity weather, cardboard warping, bursting lines and other problems frequently occur. It will seriously affect the appearance and quality of the corrugated carton, which makes many carton factories annoying. Not only will it seriously affect the quality of the carton and on-time delivery, but also cause the rework or scrap rate to increase significantly, which makes the carton factory suffer big Economic losses!
It is understood that the cardboard warping, burst lines and other problems arise from a number of reasons. In addition to the factors such as raw paper materials, processing technology, equipment, and personnel, there is one more important factor - the water content of corrugated cardboard.
Normally, it is reasonable to control the moisture content of corrugated cardboard between 12-15%; however, the tests have shown that the moisture content of the cardboard coming off the production line is about 8%, and some are even lower. 6% when the weather is dry. So this kind of cardboard is very easy to have problems such as warping and bursting.
This shows that keeping the appropriate moisture content of the corrugated cardboard can effectively reduce the occurrence of warping and bursting of the cardboard. So, how to make the corrugated board can maintain the appropriate moisture content?
Spray humidification system
The spray humidification system can be installed on the different position of the corrugator line to replenish the moisture lost in the production process, making the corrugated cardboard can maintain the appropriate moisture content - 12% to 15%.
It works well on BHS/BW Papersystems/FOSBER/AGNATI/HSEIH HISU/MINGWEI/ K&H and other brand corrugators.
If you are facing the cardboard warping, burst problem now, please feel to contact us for further information.
Contact Person: Mr. CEO
Tel: +86 13383112591