10mm Off White Color Endless Aramid Heat Transfer Printing Blankets

10mm Off White Color Endless Aramid Heat Transfer Printing Blankets

DESCRIPTION

Roll To Roll Transfer Printing Machine used Industry Endless Felt Belt have relatively high-temperature resistance, our belt has two specification: 160-180℃ and 230-260℃. All of the felt belts could meet the different needs of different customers. The interior of the blanket is specially added with a kind of base cloth which are made of endless industrial silk, which can ensure that the blanket does not run out of position after being machined, does not arch up, has a long service life, and the shrinkage rate is controlled at about 2%.

SPECIFICATION

ADVANTAGE

1. Selection Of Brand Raw Material, Common Specifications Have Temperature 160-180℃ And 220-250℃.

2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside, The Felt Will Automatically Shrink After Heating, Wrapped Tightly.

3. The Belt Surface Formation, Uniform Density, Good Resistance, Long Work Life.

APPLICATION

1. Selection Of Brand Raw Material, Common Specifications Have Temperature 16-180℃ And 220-250℃.

2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside, The Felt Will Automatically Shrink After Heating, Wrapped Tightly.

3. The Belt Surface Formation, Uniform Density, Good Resistance, Long Work Life.

DIRECTION OF OUR FELT BELT 

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

according to your needed and start printing.

Package&Delivery

Package: plastic bag+carton

Delivery: Express company & by air & by sea or as your demands

FAQ

1. How long it can be used?

It depends on your scale of production and your use custom.

2. The Sample is free?

Yes, if you need the samples, we will send it to you freely. but I hope you pay the freight. thank you.

3. What is the lead time?

About 7 working days.

4. What is packing?

By air & by sea or as your demands

Design Your Belt

Operation Temperature: 180℃,280℃                                      Your operation temperature:_____

Material:aramid/Nomex                                                            Your request material:__________
Thickness:6mm,7mm,8mm,10mm                                           Your request width:____________
Width and length can be customed                                           Your request:_________________

Contact us to get the quotation details.