logo
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
TOGETHER HTL LTD
Home News

Blind-Drilled Press Rolls vs. Grooved Press Rolls: Which Gives Better Dewatering Efficiency?

TOGETHER HTL LTD is a very good company , I am very willing to cooperate with you, safe, efficient, professional, honest, happy! Thank you for providing me with stable service and products. -----EUROPAT

—— EUROPT INDUSTRIAL

I'm Online Chat Now
Company News
Blind-Drilled Press Rolls vs. Grooved Press Rolls: Which Gives Better Dewatering Efficiency?
Latest company news about Blind-Drilled Press Rolls vs. Grooved Press Rolls: Which Gives Better Dewatering Efficiency?
1. Understanding the Difference Between Blind-Drilled and Grooved Press Rolls

Water removal in the paper machine press section is one of the most important factors influencing downstream drying energy, production efficiency, and sheet quality.

When a wet paper web enters a press nip, mechanical compression forces water out of the sheet. The press felt receives and transports part of this water, while the press roll surface must provide sufficient space for effective water handling.

A plain roll surface has limited capacity for receiving water within its contact zone. For this reason, press rolls may use engineered surface structures such as blind-drilled holes and grooves.

Although both designs create additional void volume, their structures and water-removal characteristics are different.

What is a blind-drilled press roll?

A blind-drilled press roll is a roll with numerous small, closed-end holes distributed across its working surface.

Unlike a suction press roll, the holes do not pass through the entire roll shell to an internal vacuum chamber.

During nip compression, water is expressed from the paper web and press felt into the available cavities in the covering.

After the roll leaves the nip, the collected water must be evacuated through centrifugal action, doctoring, or other suitable water-removal arrangements.

The main design parameters include:

  • Hole diameter.

  • Hole depth.

  • Hole spacing.

  • Hole distribution.

  • Open area percentage.

  • Total void volume.

  • Cover thickness.

  • Cover hardness.

  • Surface condition.

One important advantage of blind-drilled designs is their compatibility with certain softer rubber covers.

The holes provide distributed water-holding capacity without requiring continuous surface channels.

However, drilling geometry must be carefully selected. If holes are too large or their spacing is unsuitable, the pressure distribution across the nip may become less uniform.

Sensitive paper grades may also experience shadow marking when hole dimensions and felt characteristics are not properly matched.

What is a grooved press roll?

A grooved press roll features continuous channels across the roll covering.

These channels provide pathways for expressed water to move away from the press nip.

The grooves may be designed with different widths, depths, pitches, and orientations according to the application.

Important parameters include:

  • Groove width.

  • Groove depth.

  • Groove pitch.

  • Groove spacing.

  • Groove direction.

  • Open area.

  • Total void volume.

  • Cover mechanical strength.

The principal advantage is the availability of continuous drainage pathways.

When properly engineered, a grooved roll can provide effective water transport and support high nip dewatering performance.

However, the grooves must remain sufficiently open under mechanical loading. Excessive deformation or cover wear can reduce their effective water-handling capacity.

2. Which Design Provides Better Dewatering Efficiency?

Grooved press rolls often provide higher dewatering potential than blind-drilled rolls, particularly in applications where continuous water evacuation is required.

Their advantage comes from the ability of surface channels to transport water away from the nip.

Nevertheless, this does not mean that every grooved roll will outperform every blind-drilled roll.

The actual result depends on the entire press configuration.

Open area and void volume

Open area describes how much of the roll surface is available for water entry.

Void volume describes the total available space for receiving water.

These are important design parameters, but they should not be treated as interchangeable.

A roll with a high open area may not necessarily achieve better dewatering if the channel geometry is inefficient or if the collected water cannot be removed before the next nip cycle.

Engineers should therefore consider the distribution and accessibility of the available void volume.

Nip pressure and dwell time

The press nip determines how effectively water is expressed from the paper web.

Important operating variables include:

  • Nip line load.

  • Peak nip pressure.

  • Nip width.

  • Dwell time.

  • Roll diameter.

  • Cover hardness.

  • Machine speed.

  • Pressure distribution.

A surface design must provide enough drainage capacity while maintaining suitable contact conditions.

Increasing nip load without evaluating cover strength and felt compression can create additional problems rather than improve performance.

Press felt characteristics

The press felt is an essential part of the dewatering system.

It receives water from the sheet and transports it away from the nip.

Its performance depends on:

  • Permeability.

  • Void volume.

  • Compression recovery.

  • Surface structure.

  • Water-handling capacity.

  • Contamination level.

  • Operating age.

A compacted or contaminated felt can restrict water movement and reduce the benefit of an improved roll surface.

Cover hardness and mechanical strength

Cover hardness influences nip width and pressure distribution.

The covering material must also withstand repeated compression without losing its intended surface geometry.

This is particularly important for grooved rolls.

Polyurethane covers are frequently considered for demanding grooved press applications because they can offer high mechanical strength and resistance to deformation.

Rubber covers remain useful in selected applications where softer contact characteristics are required.

The appropriate material must be selected according to temperature, loading, chemical exposure, abrasion, and machine conditions.

3. When Should You Choose Blind-Drilled or Grooved Press Rolls?

The correct selection depends on the press position, paper grade, machine speed, and desired operating performance.

Applications for blind-drilled press rolls

Blind-drilled designs may be appropriate when:

  • A relatively soft cover is required.

  • The existing press configuration is designed around blind-hole drainage.

  • Distributed water-holding capacity is sufficient.

  • The paper grade requires careful control of surface marking.

  • A suitable rubber or polyurethane cover can maintain the required hole geometry.

Hole diameter, depth, and spacing should be determined according to the paper grade, felt structure, and machine speed.

Blind-drilled designs should not be selected simply because they are easier to manufacture.

Their water evacuation and long-term surface condition must also be considered.

Applications for grooved press rolls

Grooved designs should be considered when:

  • Higher nip dewatering capacity is required.

  • Continuous water-removal pathways are beneficial.

  • The cover material can maintain groove geometry.

  • The press felt can effectively receive and transport water.

  • The machine configuration supports the required drainage arrangement.

Grooved press rolls may be especially attractive when the existing press position is limited by insufficient water-handling capacity.

However, the groove design must balance drainage performance with cover strength, wear resistance, and regrinding requirements.

Why is polyurethane frequently considered?

Polyurethane can provide the mechanical strength needed for certain demanding press applications.

Compared with some softer rubber formulations, suitable polyurethane compounds can better resist deformation under repeated nip compression.

This can help maintain the designed grooves and preserve water-handling capacity.

However, polyurethane is not automatically the best choice for every application.

Engineers must consider hydrolysis resistance, operating temperature, chemical compatibility, hardness, abrasion, and the required dynamic behavior.

4. What Factors Can Reduce the Dewatering Performance of Both Designs?

A properly selected roll can still perform poorly if other parts of the press system are not operating correctly.

Blocked blind holes

Contamination, deposits, and insufficient cleaning can reduce the available cavity volume.

When water cannot enter or leave the holes effectively, dewatering performance may decline.

Groove closure

Groove deformation under excessive nip pressure or unsuitable cover hardness can reduce drainage capacity.

Poor water evacuation

Collected water must be removed before the roll returns to the next nip cycle.

Centrifugal action alone may not always provide sufficient evacuation, particularly when the felt is already carrying substantial water.

Doctoring arrangements and suitable cleaning systems should be evaluated.

Incorrect press felt selection

A felt with insufficient permeability or poor compression recovery can restrict water removal.

Felt contamination can also reduce its ability to transport water.

Uneven nip pressure

Incorrect roll crown, deflection, alignment, or loading distribution may result in an uneven cross-machine moisture profile.

Unsuitable cover material

The wrong rubber or polyurethane formulation may experience excessive deformation, wear, heat buildup, or surface deterioration.

The complete system should therefore be evaluated before replacing a press roll based only on its surface pattern.

5. How Can Paper Mills Measure and Improve Actual Press Performance?

The most reliable way to compare two roll designs is through operating measurements.

Important performance indicators include:

Press exit solids

Measure the sheet dryness after the relevant press position.

A higher solids content generally indicates more water has been removed mechanically.

Cross-machine moisture profile

Measure moisture distribution across the sheet width.

This helps identify localized dewatering problems that may not be visible from the average dryness value.

Nip pressure profile

Check whether the nip load is distributed appropriately across the working width.

Press felt condition

Review permeability, compression recovery, contamination, and water-handling characteristics.

Roll surface condition

Inspect groove dimensions, hole blockage, cover wear, surface roughness, and hardness.

Downstream dryer performance

Monitor dryer-section steam demand and production conditions.

Improved press dryness can reduce the amount of water entering the dryer section, although the actual energy saving depends on the entire machine configuration.

When evaluating a change from blind-drilled to grooved construction, engineers should establish a baseline and compare the results under controlled operating conditions.

Changes in paper grade, machine speed, furnish, and nip load must be taken into account.

6. Frequently Asked Questions

Q1. Which design is generally better for paper machine dewatering?

Grooved press rolls often offer higher dewatering potential because their continuous channels provide effective water drainage pathways. However, the best design depends on the cover material, press felt, paper grade, nip loading, and operating speed.

Q2. What is the main advantage of blind-drilled press rolls?

Blind-drilled rolls provide distributed water-holding cavities and can be compatible with certain softer roll covers and traditional press configurations.

Q3. Why do grooved rolls require strong covering materials?

The cover must resist deformation and maintain the designed channel geometry under repeated nip compression. Suitable polyurethane compounds are frequently considered for this reason.

Q4. Can blind-drilled rolls cause sheet marking?

Yes. Incorrect hole diameter, depth, spacing, or pressure distribution may contribute to shadow marking, especially with sensitive paper grades and certain felt structures.

Q5. Does higher open area always mean better dewatering?

No. Open area must be evaluated together with void volume, channel geometry, pressure distribution, water evacuation, and mechanical strength.

Q6. Can rubber covers be used for grooved press rolls?

Some rubber formulations may be suitable for selected grooved applications, but the cover must have sufficient strength to maintain the groove structure under the specified loading conditions.

Q7. How does machine speed influence roll selection?

Machine speed affects rotational conditions, water evacuation, dynamic balance, and the behavior of the press felt. The selected roll design must be compatible with the complete operating envelope.

Q8. How can I identify whether a press roll is losing dewatering efficiency?

Monitor press exit solids, moisture profile, felt condition, water carryover, roll surface cleanliness, groove condition, and cover wear. Compare results against established operating baselines.

Q9. Can changing from blind-drilled to grooved design improve dryer efficiency?

It may reduce the water load entering the dryer section if the existing press is limited by inadequate water-handling capacity. Actual energy benefits should be verified through production measurements.

Q10. What information should I provide when ordering a replacement press roll?

Provide the machine model, paper grade, basis weight, operating speed, nip load, roll dimensions, existing surface pattern, cover material, hardness, press felt specifications, and available moisture data.

Conclusion

Blind-drilled and grooved press rolls are both established solutions for improving water handling in paper machine press sections.

Grooved press rolls often provide greater dewatering potential because of their continuous drainage channels. Blind-drilled rolls remain useful where softer covers, distributed void volume, and specific traditional press configurations are preferred.

The best solution depends on the interaction between roll surface geometry, cover strength, nip pressure, press felt performance, paper grade, and operating speed.

For paper mills considering a replacement or press-section upgrade, the most effective approach is to evaluate the complete system using engineering specifications and actual operating data.


Contact HUATAO

Tony Liu | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/

HUATAO warmly welcomes paper mills, paper machine manufacturers, industrial distributors, and maintenance teams from around the world to discuss customized paper machine roller requirements and establish mutually beneficial partnerships.

Pub Time : 2026-11-18 17:42:34 >> News list
Contact Details
TOGETHER HTL LTD

Contact Person: Mr. Maple

Tel: +86 17778255675

Fax: 86--311-80690567

Send your inquiry directly to us (0 / 3000)