All my dear customer and friends,HUATAO All Kinds Of Dewatering Element As Follow For Check as follow.

Material 

1)Surface Covers: AL-OXIDE CERAMIC or ZR-OXIDE CERAMIC or SI-NITRIDE CERAMIC

2)Dewatering Boxes: Stainless Steel Components.

Use / Application

1) AL-OXIDE Ceramic is Mostly Used for * Forming Section of General Fourdrinier Machine * Forming Section of Low & Medium Working Speed Machine * For PM Speed Between 400-800mpm. * Suitable for Medium Wear Areas.

2) ZR-OXIDE Ceramic is Widely Used for * Machine Forming Section, Especially for Dewartering Elements Covers at Press Section (e.g.: Felt Suction Box Covers). * Dewatering Covers for Machine Key Parts Required High Mechanical Strength and Excellent Surface Finish. * Surface Covers for High Speed Machine (1000mpm+).

3) SI-NITRIDE Ceramic is Mainly Used for: * Machine Sections of Extremly High Temp. and/or Sudden Temp. Changes, Felt Suction Box Covers at Press Section. * Dewatering Elements Required Extremly High Mechanical Strength and Excellent Surface Finish. 4) Dewatering Boxes is Suitable for: * All Paper Grades * Different Ranges of Machine Speed.

Features

1) Surface Covers: * Excellent Paper Forming * Reduced Paper Two-Sideness * Longevity of Ceramic Material Itself * Extended
Service Life for Machine Clothing (Forming Wires & Press Felts). * Thermal Shock Resistant Up To 600°C (SI-NITRIDE CERAMIC)

2)
Dewatering Boxes: * Suitable for All Paper Grades and Speeds * Optimum Paper Quality * Efficient Drainage * Reduced Energy
Consumption

Advantage

* High Wear & Tear Resistance * Perfect Erosive Resistance * High Purity & Density * Strong Edge Toughness * Low Surface Porosity & Roughness * Excellent Efficiency * High Surface Finish * Excellent Mechanical Strength * Excellent Thermal Shock Resistant (SI-NITRIDE CERAM)

Forming Board

Hydrofoils

Vaccum Box/Bi-Vacuum Box/ Duo-Vac /Tri-Vac boxes

Bugley Box/Begaly Box/Uhle box/Blow Box/Felt Suction

Top Former

Contact

Frank

Mob/Wechat/Whatsapp:0086 19930618603

Email:export@huataogroup.com