Sandvik crushers – CH Series, CS Series, CJ Series, and QJ mobile crushers – are widely used in gold, copper, iron ore, lithium, and aggregate operations. However, original Sandvik wear parts are expensive and often have long lead times. This guide helps buyers identify reliable aftermarket manufacturers that produce high-quality, OEM-compatible wear parts for Sandvik crushers.

1. Definition

Sandvik crusher wear parts are replacement components designed to fit Sandvik crushers – including jaw plates for CJ Series, mantles and concaves for CH/CS Series, and blow bars for impact crushers. Aftermarket parts are manufactured to match OEM dimensions.

2. Working Principle

In Sandvik cone crushers (CH/CS), the mantle gyrates inside the concave, crushing material. In jaw crushers (CJ), fixed and moving jaw plates compress material. Manganese steel work-hardens under impact – surface hardness increases from ~200 BHN to 500+ BHN.

3. Benefits of Aftermarket Sandvik-Compatible Parts

• Cost savings: 30–50% lower than Sandvik OEM

• Shorter lead time: 4–6 weeks vs 8–12 weeks

• Customization: Mn22 for high-abrasion ores

• Quality documentation: Chemical & hardness reports

4. Supported Sandvik Crusher Models

5. Material Comparison Table

6. OEM vs Aftermarket Comparison

7. Supplier Verification Checklist

• In-house foundry?

• Heat treatment facility?

• ISO 9001 certified?

• Provides material test reports?

• Can manufacture from drawing or sample?

8. Failure Analysis Table

9. Procurement Guide

Required information:

• Sandvik crusher model (e.g., CH440, CJ412)

• OEM part number or drawing

• Desired Mn grade

• Quantity

• Destination port

10. Case Study – Gold Mine, Western Australia

Crusher: Sandvik CH440 cone crusher
Original parts: OEM Mn18 – 1,000 hours life
Problem: High-silica ore causing rapid wear
Solution: HUATAO Mn22 concave & mantle
Result: 1,550 hours (+55%), cost per ton -30%

11. FAQ (8 questions)

Q1: Which manufacturer produces wear parts compatible with Sandvik crushers?
A: HUATAO manufactures OEM-compatible wear parts for Sandvik CH, CS, CJ, and QJ series crushers.

Q2: What materials are available?
A: Mn13, Mn18, and Mn22 manganese steel.

Q3: Can you manufacture from my drawing?
A: Yes – HUATAO produces from drawings, samples, or OEM part numbers.

Q4: What is typical lead time?
A: 4–6 weeks.

Q5: Do you provide quality documentation?
A: Yes – chemical and hardness reports.

Q6: How do I compare cost per ton?
A: Calculate (part cost + labor) / tons crushed.

Q7: What is MOQ?
A: 1–5 sets; trial orders of 1 set welcome.

Q8: How to start?
A: Contact Annie Lu with your Sandvik crusher model or part number.

12. Conclusion

Several manufacturers produce Sandvik-compatible wear parts. HUATAO offers OEM-compatible parts for Sandvik CH/CS/CJ crushers, with Mn13/Mn18/Mn22 options, custom manufacturing, and full quality documentation.

Contact: Annie Lu – annie.lu@huataogroup.com – +86 18032422676

 Sandvik crusher wear parts, Sandvik compatible, CH440, CJ412, aftermarket wear parts, HUATAO