logo
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
TOGETHER HTL LTD
Home News

Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?

TOGETHER HTL LTD is a very good company , I am very willing to cooperate with you, safe, efficient, professional, honest, happy! Thank you for providing me with stable service and products. -----EUROPAT

—— EUROPT INDUSTRIAL

I'm Online Chat Now
Company News
Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?
Latest company news about Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?

Quick Answer

Sectional flights are made from separate formed plate segments and joined into a helix. Continuous flights are formed as one uninterrupted spiral from strip or coil. Sectional construction is often assessed for thicker plate, custom dimensions and segment replacement. Continuous construction may suit repeatable geometries and longer production lengths. Confirm the choice against the drawing, material, duty and machine range.

Understand the Construction Before Comparing Price

The term “screw flight” covers more than one construction. In sectional flighting, a plate blank is formed into a helical segment, commonly close to one revolution. The segments are aligned and joined end-to-end, then attached to the shaft or tube. In continuous flighting, strip or coil is formed into a helix without segment-to-segment joints along the flight body.

Cold-rolled helicoid flighting and mould-wound flighting are both continuous forms, but their manufacturing processes are different. Cold rolling progressively shapes strip through forming rolls or cones. Mould winding uses a winding arrangement and geometry-specific tooling. A buyer should identify the process rather than simply requesting “continuous flight.”

When Sectional Flighting Is Worth Evaluating

Sectional construction is commonly considered for custom flight dimensions, heavier plate sections, special profiles and applications where individual segments are needed for assembly or maintenance. Because the flight is made from plate, designers can review a broad combination of OD, ID, pitch, thickness and material. Actual feasibility depends on blank preparation, forming force, die design and the machine’s confirmed working range.

The trade-off is additional fabrication. Separate blanks must be prepared and formed, then aligned and joined. The weld sequence, fit-up, distortion control and inspection method can influence the final pitch and geometry. Include these steps when calculating labor and delivery time.

For equipment selection, the Spiral Blade Forming Machine is the relevant product category to assess for individual sectional blade forming. The supplier should confirm the target material and dimensions before a machine is selected.

When Continuous Flighting May Be More Suitable

Continuous flighting may be attractive for stable product families where the required strip dimensions and helix geometry fit the available equipment. It can reduce segment-to-segment joints and may simplify the flight body fabrication for repeat orders. Cold-rolled helicoid flighting commonly has a thickness profile that differs between the root and tip, so the actual cross-section must be compared with the design requirement.

Review the Continuous Screw Flight Cold Rolling Machine when the intended product is cold-rolled continuous flight. If the required route is mould winding, assess the Winding Spiral Blade Forming Machine separately. These machines should not be treated as interchangeable.

Compare the Duty, Not Just the Flight Name

Abrasive material, impact, corrosion, moisture, temperature and cleaning requirements all affect the material and thickness decision. Sectional flighting can be made from heavier plate, but more thickness does not automatically guarantee longer service life. Wear also depends on conveying velocity, loading, clearances, screw speed, support and the contact pattern.

Check the complete geometry: OD, ID, pitch, thickness profile, flight height, handedness and finished length. A mismatch in pitch or ID can affect shaft fit and conveying behavior even when the outside diameter is correct. Where replacement is involved, confirm whether the existing screw can accept a continuous length or whether segment-based installation is necessary.

A Practical Selection Checklist

Identify whether the required part is sectional or continuous.

Provide OD, ID, pitch, thickness and any root-to-tip thickness requirement.

Specify material grade and the operating wear or corrosion conditions.

State flight hand, finished length, shaft/tube details and joint requirements.

Estimate quantity per batch, annual demand and frequency of size changes.

Confirm tolerances, inspection method and acceptance criteria.

Ask for a drawing review and a representative forming trial where practical.

FAQ

Can sectional flights be used for heavy-duty conveyors?

They are often evaluated for heavy-duty designs because plate construction can accommodate thicker sections. The final design still depends on material, thickness, weld quality, shaft support, load and wear conditions. A supplier or conveyor engineer should review the actual duty and drawing.

Is continuous flighting seamless?

The flight body can be formed as an uninterrupted helix without segment-to-segment joints. However, the flight still needs to be attached to the shaft or tube, so the complete screw assembly may contain welds and other joints.

Which type is best for custom sizes?

Sectional flighting often offers flexibility for custom combinations of OD, ID, pitch, thickness and material, subject to tooling and machine limits. Continuous equipment also has a working range, so custom geometry must be checked against the specific machine.

What should I send for a quotation?

Send a drawing or sample, OD, ID, pitch, thickness, material grade, flight hand, length, quantity, application and tolerances. Include shaft or tube details and joint requirements where relevant.

Can one machine make both types?

Do not assume so. Sectional hydraulic forming, continuous cold rolling and mould winding use different process arrangements and tooling. Confirm the machine’s actual function and working range before purchase.

The practical decision is to match the flight structure to the operating duty and the manufacturing route to the order profile. A supplier review based on drawings and material data is more reliable than selecting by machine name or headline output.

Contact HUATAO

Email:lucychai0315@gmail.com

Tel / WhatsApp / WeChat: +86 153 7388 3537

WhatsApp: https://wa.me/15373883537

Website: https://www.refinerdisc.com/

Contact page: Contact HUATAO

Pub Time : 2026-11-17 10:54:47 >> News list
Contact Details
TOGETHER HTL LTD

Contact Person: Mr. Maple

Tel: +86 17778255675

Fax: 86--311-80690567

Send your inquiry directly to us (0 / 3000)