logo
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
TOGETHER HTL LTD
Home News

Self-Cleaning Overband Magnet Installation Angle: What Slope Actually Keeps Iron Discharge Clean?

TOGETHER HTL LTD is a very good company , I am very willing to cooperate with you, safe, efficient, professional, honest, happy! Thank you for providing me with stable service and products. -----EUROPAT

—— EUROPT INDUSTRIAL

I'm Online Chat Now
Company News
Self-Cleaning Overband Magnet Installation Angle: What Slope Actually Keeps Iron Discharge Clean?
Latest company news about Self-Cleaning Overband Magnet Installation Angle: What Slope Actually Keeps Iron Discharge Clean?

Summary Table

Item

Description

Function

Mounting inclination (in-line)

5–15° above head pulley, 20° practical maximum

Aligns the pole face with the thinning material trajectory

Skew angle (cross-belt)

90° nominal; ≤30° where layout forces it

Keeps full-width coverage while allowing side discharge

Discharge chute angle

50–60° from horizontal

Gives iron enough slope to clear the lip and fall free

Suspension height

Belt width × 0.20–0.30 (200–300 mm on a 1,000 mm belt)

Balances capture force against lump clearance

Level tolerance

≤1° across the belt; centre offset ≤50 mm

Prevents one-sided capture and cleat belt tracking drift

Magnet length

≥1.1 × belt width (cross-belt), plus 300–500 mm for the throw

Covers the full burden profile including edges

Discharge belt speed

1.5–2.5 m/s, matched to chute geometry

Determines the horizontal throw that the chute must accept

Field at working gap

≥8,000 G at 30 mm; +2,000 G per additional 10 mm

Maintains lift force as burden depth increases

Structure near magnet

304/316 stainless or aluminium within 500 mm

Stops the frame from stealing field and holding iron

Re-check interval

Gauss meter every 6 months, angle and gap every quarter

Detects drift before capture efficiency collapses

Market Watch: What Is Pressing on Wear and Reliability Budgets Right Now

Three cost signals converged in mid-November 2026, and all three push plant managers toward the same conclusion: get tramp iron out of the line before it reaches the crusher.

Base metals softened, budgets tightened. Copper traded near USD 13,375/t on 17 November, down about 1.7% in a session, with London Metal Exchange stocks back around 320,000 t. Gold slipped to roughly USD 3,865/oz and iron ore fell 2.5% to about USD 88.15/t as Chinese hot metal output continued to slide into the northern winter. When the realised price falls, the maintenance budget is the first line item to be questioned — and unplanned crusher downtime is the first cost that cannot be questioned.

New conveying capacity is being committed now. Freeport-McMoRan approved a USD 4.5 billion expansion of its Bagdad copper-molybdenum operation, Rio Tinto released a further USD 144 million toward Resolution Copper, and the Simandou iron ore project continued to ramp toward its annualised run-rate. Every one of those projects adds long conveying runs, transfer towers and primary crushing stations — the exact places where a mis-set overband magnet turns into a weekly chute-cleaning job.

Consumable inputs are diverging. Nickel gained about 3.7% over 30 days while battery-grade lithium carbonate in China fell nearly 15% to around CNY 92,350/t. For wear-part buyers this means rubber and polyurethane pricing and magnet coil (copper) pricing are moving in different directions, so the total cost of ownership case for a correctly angled self-cleaning unit has to be built on measured numbers, not on catalogue claims.

The practical takeaway: the geometry decisions in this article cost nothing to get right at installation and are expensive to get wrong afterwards.

What Is the Installation Angle of an Overband Magnet?

The installation angle of an overband magnet is the inclination of the magnet's pole face relative to the conveyor belt plane, combined with the angle at which the self-cleaning belt discharges captured iron. It is not one number. It is a set of four related angles that must be solved together: mounting inclination, transverse skew, discharge chute slope, and the local belt incline at the mounting point.

A Self-Cleaning Electromagnetic Separator is a suspended magnet with an endless cleat belt running around the magnetic block. Iron is lifted from the burden, pinned to the cleat belt, carried out of the field and thrown into a side chute. The angle of the whole assembly decides three things at once: how long the iron sits inside the field, how far the cleat has to carry it, and where it lands when it lets go. Get the Magnetic Separators geometry right and the unit runs for years without an operator touching it. Get it wrong and you have built a machine that politely picks iron up and puts it back.

This is a Magnetic stage problem sitting inside a Conveyor problem, which is why the answer is never a single degree figure copied from a brochure.

latest company news about Self-Cleaning Overband Magnet Installation Angle: What Slope Actually Keeps Iron Discharge Clean?  0

FAQ

What slope should a self-cleaning overband magnet be mounted at?

Use 5–15° of tilt for in-line mounting above a head pulley, with 20° as a practical maximum, and mount cross-belt units at 90° to the belt. Then set the discharge chute at 50–60° from horizontal. If you can only remember one number, remember the chute angle — it is what stops iron sliding back into the stream.

Why does my magnet pick iron up and then drop it back on the belt?

Almost always because the discharge chute back plate sits inside the natural throw of the cleat belt, or because the chute is shallower than 45°. The iron hits steel, loses energy and falls through the gap. Move the chute 100–150 mm further out, raise the slope to 50–60°, and check that the cleat belt is running at its rated speed.

Can I mount an overband magnet on an inclined conveyor?

Yes, but keep the mounting zone as shallow as possible, ideally at the head end or on a horizontal run. Above roughly 15–18° of incline the burden re-profiles, coarse material rolls back and the effective bed gets deeper. In that case treat the burden as 20–30% deeper when you calculate the working gap.

How much skew is acceptable on a cross-belt installation?

Up to about 30° is accepted by most manufacturers, but every degree costs projected coverage, and at 30° you have lost roughly 13% of the effective width. Above 20° of skew, lengthening the magnet or relocating the mounting point is usually cheaper than living with the edge misses.

What suspension height should I use?

Start with belt width × 0.20–0.30 — around 200–300 mm on a 1,000 mm belt — then take the lowest value that clears the largest lump with a safety margin. Field falls about 10–15% for every additional 5 mm of gap, and every extra 10 mm calls for roughly 2,000 gauss more to hold capture.

Does the magnet angle matter more than the magnet strength?

For discharge quality, geometry matters more. A correctly angled mid-strength unit will out-perform a strong unit aimed at the wrong point, because capture without clean release just recycles iron through the line. Strength still matters for deep burdens and fine iron, so the right order is: position, angle, gap, then field.

latest company news about Self-Cleaning Overband Magnet Installation Angle: What Slope Actually Keeps Iron Discharge Clean?  1

Contact Us

Contact: Annie Lu

Email: annie.lu@huataogroup.com

Phone / WhatsApp: +86 180 3242 2676

Website: http://www.tufflexscreen.com

We warmly welcome customers from around the world to contact us and establish mutually beneficial partnerships.

Pub Time : 2026-11-19 09:10:56 >> News list
Contact Details
TOGETHER HTL LTD

Contact Person: Mr. Maple

Tel: +86 17778255675

Fax: 86--311-80690567

Send your inquiry directly to us (0 / 3000)