The rough rubble generally requires that the thickness of the middle of the stone is not less than 150mm, the length is 300-400mm, the mass is about 20-30kg, the strength should not be less than 10MPa, and the softening coefficient should not be less than 0.8; the flat rubble is slightly processed from the rubble. , the shape is more chaotic and tidy, its shape basically has six sides, but the surface is rough, and the thickness of the middle is not less than 200mm.

1. How many tons of gravel can be processed in one ton of rubble?

The rubble will go through multiple steps such as primary crushing, secondary crushing, medium and fine crushing, and screening, and eventually become crushed stones of different sizes. 05, 12, and 13 stones are common crushed stone specifications.

The general yield of rubble processed into crushed stone is about 80-90%, that is to say, one ton of rubble can break more than 0.8-0.9 tons of stones.

Of course, how much gravel can be crushed in one meal still needs to be combined with the actual situation such as the cleanliness of raw materials, the requirement of discharging particle size, and the shape of the crushing equipment. decline.

2. What equipment is needed to process rubble into gravel?

1). Jaw crusher (coarse crushing equipment)

Production capacity: 1-1000t/h,

Feed size: ≤1200mm

Crushing principle: Squeeze and crush

Performance characteristics: The jaw crusher is suitable for many materials and has strong crushing capacity. It can perform coarse crushing on various soft and hard materials to meet the next fine crushing conditions. The whole machine has simple structure, convenient operation and stable operation. common equipment.

2). Impact crusher (fine crushing equipment)

Production capacity: 30-800t/h

Feed size: ≤800mm

Crushing principle: impact crushing

Performance characteristics: The impact crusher is suitable for medium and fine crushing of materials with medium and below hardness, such as bluestone, dolomite, etc.

3). Sand making machine

Production capacity: 12-650t/h

Feed particle size: 35-50mm

Working principle: stone hits stone, stone hits iron

Performance characteristics: Sand making equipment is mainly impact sand making machine, with exquisite workmanship, sophisticated manufacturing and mature technology, and is deeply favored by investors. With reasonable and wide sales.

3. Hundred tons of rubble crushing and sand making production line

Processing material: rubble

Production capacity: 100 tons per hour

Equipment configuration: vibrating feeder, jaw crusher, impact crusher, sand making machine, sand washing, vibrating screen, conveyor belt.