A hydraulic single-piece flights screw forming machine is suitable for manufacturing large-diameter screw flights when the required blade dimensions, plate thickness and material fall within the machine's working range. For larger products, the press should be selected by checking outer diameter, inner diameter, pitch, material and forming requirements together. The HT240, HT280 and HT330 are three models worth evaluating for larger flight production.
Large screw flights require careful control of their finished geometry. As the outer diameter and plate thickness increase, the forming process becomes more demanding. The manufacturer needs to consider not only the force required to shape the plate but also the mold configuration and the dimensions of the finished spiral blade.
A hydraulic press forms an individual blade through a pressing operation. The plate is prepared according to the required dimensions, positioned for forming and shaped through a matched mold. The formed blade is then inspected before it moves to the next fabrication stage.
This method is particularly relevant to manufacturers producing individual spiral flight sections or customized blades in different sizes.
It should not be confused with continuous flight rolling. Continuous forming and single-piece hydraulic pressing have different working methods and are intended for different production requirements.
For larger products, the main models to evaluate are HT240, HT280 and HT330.
The HT240 is listed with an outer diameter below 1,200 mm, plate thickness of 2–35 mm and pitch of 180–1,000 mm. Its hydraulic pressure is 120 tons at 20 MPa.
The HT280 is listed for an outer diameter below 1,600 mm and plate thickness of 2–40 mm. Its pitch range is 240–900 mm, and its hydraulic pressure is 180 tons at 20 MPa.
The HT330 is the largest model in this group. Its listed outer diameter is below 2,400 mm, plate thickness is 2–50 mm and pitch is 240–900 mm. Its hydraulic pressure is 260 tons at 20 MPa.
These values describe the catalogue working ranges. They should not be treated as proof that maximum diameter, maximum thickness and every pitch can be combined in one product. The actual drawing must be reviewed before confirming the model.
The first step is to identify the largest and most difficult flight you intend to manufacture. However, the smallest product in your production range also matters. A suitable machine should cover the full range of products you expect to make.
Pay attention to five key dimensions and conditions.
Outer diameter: Confirm that the finished blade diameter is within the machine's forming range.
Inner diameter: Check the central opening against the required shaft or tube dimensions.
Pitch: Confirm the distance between adjacent turns.
Plate thickness: Make sure the selected model can process the required thickness.
Material: Carbon steel, stainless steel and wear-resistant materials may require different forming considerations. The exact grade should be confirmed before the machine configuration is finalized.
Two screw flights with the same outer diameter may still require different machine configurations because their thickness, pitch, inner diameter and material can differ.
A machine should therefore be selected according to the customer's actual flight dimensions and material. Providing drawings and sample photos helps the supplier assess the suitable press and mold arrangement.
This approach is more reliable than choosing equipment based only on the maximum diameter advertised in a catalogue.
Machine reliability is also important when evaluating long-term production costs.
The product information provided for this equipment includes a one-year warranty. With proper operation and maintenance, the expected service life can reach approximately 7–8 years.
The machine has very few wearing parts. When replacement is needed, the parts are inexpensive and easy to change. This can simplify routine maintenance and reduce the difficulty of keeping the equipment in service.
Actual service life depends on operating frequency, material conditions, maintenance and the working environment.
Before requesting a quotation, prepare your finished blade outer diameter, inner diameter, pitch, plate thickness and material grade. If you manufacture several sizes, include the smallest, largest and most difficult specifications.
For large-diameter single-piece screw flights, HT180,HT240, HT280 and HT330 are the main models to evaluate. The correct hydraulic press is the one that matches the complete product specification and planned production range.
Email:lucychai0315@gmail.com
Whatsapp/Wechat:+86 15373883537
Website:www.refinerdisc.com
Contact Person: Mr. Maple
Tel: +86 17778255675
Fax: 86--311-80690567