logo
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
TOGETHER HTL LTD
Home News

Why Replace Woven Wire Mesh with Polyurethane Screen Panels?

TOGETHER HTL LTD is a very good company , I am very willing to cooperate with you, safe, efficient, professional, honest, happy! Thank you for providing me with stable service and products. -----EUROPAT

—— EUROPT INDUSTRIAL

I'm Online Chat Now
Company News
Why Replace Woven Wire Mesh with Polyurethane Screen Panels?
Latest company news about Why Replace Woven Wire Mesh with Polyurethane Screen Panels?

Definition

Woven wire mesh is a screening medium made from metal wires woven into a grid to form apertures. It is characterised by high open area, relatively low cost and predictable sizing accuracy, but is susceptible to wear, fatigue and breakage in abrasive duty.

Polyurethane screen panels are moulded elastomer screening media available in tensioned or modular designs. They offer wear resistance, impact absorption, noise reduction and design flexibility, at the cost of generally lower open area.

Effective open area is the proportion of the screen surface actually available for material passage during operation, after blockage. It is the figure that governs capacity, not the nominal open area on a drawing.

Working Principle

The comparison between wire mesh and polyurethane comes down to how each material handles the forces applied by the feed.

Abrasion. Wire mesh thins as particles slide across it, eventually breaking. Polyurethane removes material more slowly because the elastomer deforms under particle contact and recovers, rather than abrading directly.

Impact. Wire fatigues under repeated impact and crack propagation is fast. Polyurethane absorbs energy through elastic deformation, which extends life at the feed zone where large particles land.

Noise. Steel transmits impact energy as sound. Polyurethane absorbs it, producing a quieter deck. The difference is measurable and is sometimes the deciding factor on multi-screen plants.

Open area. Wire mesh can be woven with high open area because the wires are thin. Polyurethane requires material between apertures for structural integrity, which reduces open area. This matters most in fine screening where the cut size is close to the aperture dimension.

Blockage. Wire mesh can peg near-size particles and blind under wet clay. Polyurethane's flexible structure and moulded aperture profiles can reduce both, particularly with tapered or slotted designs.

Benefits

  • Longer wear life in abrasive mineral duty, reducing changeout frequency.

  • Impact absorption at the feed zone without the fatigue cracking seen in wire.

  • Lower noise levels on multi-screen installations, improving working conditions.

  • Modular replacement allowing position-specific changeout rather than full-deck replacement.

  • Flexible aperture design with square, rectangular, slotted or dewatering profiles.

  • Lower total operating cost when evaluated as cost per tonne over full service life.

Applications

  • Iron ore and copper ore screening where abrasive wear drives changeout frequency.

  • Quarry and aggregate production where sharp crushed rock damages wire quickly.

  • Coal preparation where wet conditions and clay content cause blinding.

  • Gold ore processing where high-value feed makes downtime expensive.

  • Fine screening duty where aperture geometry and open area both matter.

  • Dewatering decks where slot design and drainage behaviour are critical.

These duties sit between size reduction in CRUSHING and downstream CLASSIFICATION or DEWATERING. A media change alters what reaches the next stage, which is why the decision should include the circuit, not only the deck.

Material Comparison



Property Woven Wire Mesh Polyurethane Panel Rubber Screen Media PU Fine Screen Panel
Open area High Moderate Moderate High at fine cuts
Abrasion resistance Moderate Good Good–excellent Good
Impact resistance Low Moderate Excellent Moderate
Noise High Low Low Low
Modular replacement Rarely Common Common Common
Fine separation accuracy Good Moderate Limited Good
Best application Clean dry high-capacity duty Abrasive duty with moderate open area Coarse high-impact zones Fine screening and dewatering

Application Comparison



Scenario Dominant Problem Recommended Direction
Wire wears out in weeks on abrasive ore Abrasion POLYURETHANE & RUBBER SCREEN PANELS with appropriate formulation
Feed end cracking from impact Impact PU impact panel at feed zone; hybrid deck
Multiple screens creating noise problems Noise PU panels across the deck
Full-deck replacement costly and slow Maintenance Modular PU panels with position-based replacement
Fine screening with tight cut size Open area and accuracy POLYURETHANE FINE SCREEN PANEL or retain WIRED & STEEL SCREEN MESH
Dewatering duty with drainage needs Slot design PU dewatering panel matched to DEWATERING requirements

Industry Application Matrix



Industry Typical Material Wire Wear Risk Replacement Case
Iron ore Hematite, magnetite High Strong case for PU in abrasive duty
Copper Copper ore High Strong case, especially at feed zone
Gold Gold ore, alluvial Moderate–high Case depends on cut size and feed
Coal Coal with clay Moderate Case depends on wet handling
Aggregates Limestone, granite High Strong case for abrasive crushed rock
Sand and gravel Natural sand Moderate Case depends on open area requirement
Industrial minerals Silica sand Moderate–high Fine screen evaluation required
Base metals Lead zinc, nickel ore High Strong case for abrasive duty
Phosphate Phosphate ore Moderate Case depends on wet handling
Tailings Slurry, fine solids Moderate Case depends on drainage requirements

Selection Guide

1. Diagnose the failure mode. Wire thinning and breakage indicate abrasion. Feed-end cracking indicates impact. Full-deck failure after days indicates wrong a

Pub Time : 2026-11-16 09:20:25 >> News list
Contact Details
TOGETHER HTL LTD

Contact Person: Mr. Maple

Tel: +86 17778255675

Fax: 86--311-80690567

Send your inquiry directly to us (0 / 3000)