Product Details:
Payment & Shipping Terms:
|
Color: | White | Technology: | Needled Punched |
---|---|---|---|
Material: | Polyester | Material Feature: | Heat Resistant |
Thickness: | 6mm,8mm,10mm | Width: | 20-2000mm |
Length: | 540-13500mm | Continual Temperature: | 180℃ |
Peaking Temperature: | 200℃ | Usage: | Aluminum Extrusion Lines |
Highlight: | polyester needle felt,nomex felt sheet |
Polyester Conveyor Belt To Aluminium Extrusion Handling System
Product profile
Polyester Endless Belt, withstanding up to 200deg C, can be used on Storage Table for the extrusion handling system. Sometimes, due to the fast heat dissipation of small extrusion profiles, the temperature of Storage Table for light-duty production lines smaller than 800T has been down to 18deg C below. In this case, as a substitute for Nomex Endless Belt, using Polyester Endless Belt can save the cost for felt. Usually, Endless Belt for Storage Table will be relatively longer and sufficient tension members will enhance the tensile capacity. Besides, in order to avoid the profiles from friction during any process, Polyester Endless Belt will be used at the powder coating workshop as well.
Product Specification
Product Number | Color/Temperature resistance | Composition |
HPK | Brown+Yellow/600℃ | PBO+Kevlar+one layer Nomex tension member |
HKN | Yellow /480℃ | 100%Kevlar+one layer Nomex tension member |
HKCN | Green/ 480℃ | 80%Kevlar+20%Carbon fibre+one layer |
HNN | Off White /280℃ | 100%Nomex+one layer Nomex tension member |
HPP | Polyester/180℃ | 100%Polyester+one layer Nomex tension member |
Available Size (mm) |
Width: 20---2000 | |
Length: 540---13500 | ||
Thickness: 6---12 |
Color: White
Material: 100% Polyester + Polyester fabric
Temperature Resistance: 200℃
Length: 900mm~25000mm
Width: 20mm~1700mm
Total Thickness: 5mm~15mm
Hard Degree: Hard treatment by resin
Product Advantage
Heat resistance to 200℃
High-density structure with no delaminating or fuzziness;
No elongation under high tension or heavy loads;
Abrasion resistance with smooth cutting and even surface;
Excellent belt tracking;
Pollution-free to profiles.
Product Application
Mainly used for Aluminum Extrusion Profile Plant,the felt belt Instead of graphite to delivery the aluminum profile from extrusion press to cooling table,It is a progress from high temperature to low temperature.it could solve your problem of graphite marks on aluminum extrusions.Some picture for your reference:
Needle felt pad can suitable from 180-600°C
Type | Color | Composition | Temperature |
PBO-100% | Brown / Brown + Brown | Pure PBO + PBO fabric (ultra-high temperature double-sided discharge for the special blankets> | 600°C |
PBO+Kevlar | Brown+yellow | PBO+Kevlar Base fabric (ordinary single-sided machine for carpets) | 600°C |
PBO+Kevlar | Brown+yellow | PBO+Kevlar (Flat type PBO felt) | 600°C |
Kevlar | Yellow |
100%Kevlar 100%Kevlar+kevla Base fabric |
480°C |
Nomex | off White | Nomex+Kevlar | 280°C |
Polyester | White | 100% polyester + l00% polyester + base fabric | 180°C |
Contact Person: Maple
Tel: +86 15103371897
Fax: 86--311-80690567