Eddy Current Non Ferrous Metal Separator for Electronic Scrap Processing Line

Eddy Current Non Ferrous Metal Separator for Electronic Scrap Processing Line

Product Description:

This compact eddy current separator is designed for smaller WEEE recycling operations with limited floor space. The machine measures just 1800 mm in length 900 mm in width and 1300 mm in height making it suitable for installation in tight production areas. The working width is 400 mm processing 0.5 to 1.2 tons per hour of shredded electronic material. A 1.5 kW motor drives the magnetic rotor at speeds adjustable from 1500 to 4800 RPM. The belt is 4 mm thick anti-static polyurethane with a smooth surface finish. The frame is constructed from 4 mm stainless steel with a brushed finish requiring minimal maintenance. A manual splitter baffle with a simple locking lever allows operators to adjust the separation point in seconds. The magnetic rotor features neodymium magnets arranged in an eccentric pattern delivering a peak alternating field of 4200 gauss. This separator is ideal for processing crushed PCB scrap cable granulator tailings and plastic regrind from small electronics. The unit comes with a floor-standing frame and adjustable feet for leveling on uneven surfaces.

Product Introduction

This Eddy Current Separator (ECS) is an advanced sorting system designed to automatically eject non-ferrous metals (aluminium, copper, zinc, brass) from mixed solid waste streams. Built for continuous operation in Municipal Solid Waste (MSW) facilities, Incinerator Bottom Ash (IBA) recovery lines, and single-stream recycling centers, it transforms low-grade residue into profitable metal fractions.

Target Applications

• Municipal Solid Waste (MSW) Treatment Plants:

  Recovers beverage cans, aluminum foils, and small non-ferrous fragments from the heavy fraction after primary crushing / bag opening.

• Incineration Bottom Ash (IBA) Valorization:

  Extracts valuable non-ferrous metals from bottom ash, maximizing resource recovery and reducing disposal costs.

• Scrap Metal Recycling (Zorba Upgrading):

  Purifies shredded non-ferrous mixtures (Zorba) into high-grade copper, aluminum, and magnesium for smelters.

• Glass / Plastic Purification Lines:

  Removes metal contaminants from crushed glass (cullet) or plastic flakes to protect downstream shredders and improve end-product purity.

Key Advantages for Heavy-Duty Waste Streams

Separation Efficiency Guarantee

Up to 98% recovery rate for aluminium cans (20-50mm size) and 85-92% for fine non-ferrous particles (2-10mm), verified in real MSW plants.

Technical Specifications (Standard Range)

Competitive Advantages for Project Buyers

• Built for 24/7 harsh operation

  Reinforced frame, sealed bearings, and oversized shaft – tested in MSW plants handling >30% moisture and 15% abrasive content.

• Lower operating cost

  Energy-efficient rotor design consumes 20-30% less power than traditional models at same throughput.

• Easy integration

  Bolt-on design with standard inlet/outlet heights; can be retrofitted into existing conveyor lines within 2 days.

• Global after-sales support

  Spare parts (belts, bearings, rotor modules) available from regional warehouses. 12-month warranty + remote troubleshooting.

Request for Quotation (RFQ) – Please Provide:

To engineer the right solution for your facility, kindly share:

• Feed material description (e.g., MSW heavy fraction, bottom ash, glass cullet, Zorba)
• Particle size range (minimum to maximum in mm)
• Target output purity requirement (e.g., >95% aluminium)
• Expected processing volume (tons per hour or tons per day)
• Preferred working width (mm) and local voltage/frequency
• Site environmental conditions (indoor/outdoor, humidity, temperature)
• *Optional: Send a 2-5 kg material sample to our test center for a free separation analysis report.*

Contact Our Waste Sorting Specialist

• Email: Julie@huataogroup.com
• WhatsApp / WeChat: [+86 123 4567 8901]
• Website: https://www.huataoshredder.com