3500mm High Speed Tissue Paper Machine

 
 
3500mm High Speed Tissue Paper Machine Description:
 

The automatic tissue paper making machine mainly used to make toilet tissue paper roll in paper making industry. Raw material: wood pulp,waste paper(waste white shavings,or waste books,waste newspaper,office paper,etc). Mainly including forming section,press section,drying section,reeling section.

 
3500mm High Speed Tissue Paper Machine Crafts Parameters:
 
Pulp: wood pulp plate, waste paper etc as raw material

1. Feeding pulp concentration : 0.3-0.9‰
2. Beating degrees : 30-38°SR
3. Paper sheet dryness
4. come out from wire case : 18-20％
5. Before go through MG cylinder : 36-40％
6. Come out from MG cylinder : 90-94％
7. Finish tissue : 90-94％
8. Lateral shrinkage : 8-10％
9. Day running hours: 22 hours/d
10. Papermaking rate : 94％
11. Yield : 95％
12. Touch roll line pressure: 60 KN/m

3500mm High Speed Tissue Paper Machine Supporting parameter
 
1. AC voltage : 380V；50Hz

• Control voltage : 220/24V
• Water pressure: 0.3Mpa;

2. Working pressure: 0.2Mpa

• Compressed air pressure: 0.8Mpa;

3. Working pressure: 0.5Mpa

• Steam pressure: 0.6Mpa;

4. Working pressure:0.3Mpa

• Vacuum suction tank: 20-40Kpa
• Water requirement: pure color, remove impurities, PH value 6.8

 
3500mm High Speed Tissue Paper Machine Main Technical Parameters:
 
1. Paper weight: 18-30g/m2

• Net width of paper :3500mm
• Designed speed : 250m/min
• Working speed: 160-230m/min
• Nominal capacity : 10-15T/D
• Track gauge : 4500mm
• Wrinkling rate : 15-30℅
• Drive way: Y-type AC motor drive division, section drive
• Control way:frequency conversion
• Power:
• MG cylinder motor: 95kw
• Roll-cylinder motor: 7.5kw
• Total:102.5Kw
• Arrangement: single-layer, the left and right hand arrangement

 
 
3500mm High Speed Tissue Paper Machine Photos